JA-120E-WH Jablotron 100+ Bus Outdoor RFID and NFC Reader – White
- Brand::Jablotron
- Product Code: JA-120E-WH
- Availability: In Stock
| Power supply | from control panel |
|---|---|
| Backup (idle) power consumption | 45 mA |
| Maximum power consumption | 95 mA |
| RFID frequency | 125 kHz |
| MIFARE frequency | 13.56 MHz |
| Environment | outdoor general |
| Ingress Protection Code | IP 55 |
| Operational temperature range | -25 �C to +70 �C |
| Dimensions | 96 x 67 x 13,5 mm |
| Weight | 140 g |
The JA-120E-WH is a white outdoor reader that reads both 125 kHz RFID and 13.56 MHz MIFARE credentials. Its front is made of special tempered synthetic glass that resists scratches from keys and other hard objects, and it can activate a PG output to release an electric lock or operate the security system.
Highlights
- Dual-technology reading: 125 kHz RFID and 13.56 MHz MIFARE
- Scratch-resistant tempered glass front
- IP55, outdoor general environment, –25 °C to +70 °C
- 45 mA idle, 95 mA maximum
- 96 × 67 × 13.5 mm, 140 g
Where it suits
Suits gates, side entries and building entrances in Australian outdoor conditions.
Installation and set-up
Connect it to the wired Jablotron 100+ bus, enrol it and set its behaviour in F-Link. We recommend installation by a Jablotron-trained installer; the installation manual is available in the Downloads tab.
Tags: JA-120E-WH, JA-120E, outdoor reader, RFID NFC reader, access control, Jablotron 100+, IP55, white