JA-111H-AD TRB Jablotron 100+ Bus Module for System Control
- Brand::Jablotron
- Product Code: JA-111H-AD TRB
- Availability: In Stock
| Power | from control panel BUS 12 V DC (9 � 15 V) |
|---|---|
| Current consumption - Nominal consumption - | all inputs connected to GND to calculate backup (+ consumption of connected devices) |
| Current consumption - Maximal consumption - | 12 mA |
| for cable selection | (+ consumption of connected devices) |
| Maximum allowed current of the connected | 50 mA detector |
| Dimensions | 16 x 30 x 12 mm |
| Weight | 8g |
| Classification | Security grade 2 / environmental class II |
| - according to | EN 50131-1, EN 50131-3 (ACE type B) |
| - environmental | Indoor general |
| - operating temperature range | -10 �C to +40 �C |
The JA-111H-AD TRB connects any control device with contact or impulse outputs to the Jablotron 100+ system and supplies it from the bus.
Highlights
- Controls PG outputs
- Minimum activation time 0.1–300 s
- Impulse (dual-conductor) or status (single-conductor) control
- Max. connected device current 50 mA
- 16 × 30 × 12 mm, 8 g
Where it suits
Use it to arm from key switches or third-party controls.
Installation and set-up
Connect it to the wired Jablotron 100+ bus, enrol it and set its behaviour in F-Link. We recommend installation by a Jablotron-trained installer; the installation manual is available in the Downloads tab.
Tags: JA-111H-AD TRB, control input, key switch module, Jablotron 100+, bus