JA-110G-CO Jablotron 100+ Bus Module for Ei208W(D) CO Detector
- Product Code: JA-110G-CO
- Availability: In Stock
| Power | from the control panel BUS 12 V (9 � 15 V) |
|---|---|
| Current consumption in standby mode | 5 mA |
| Current consumption for cable choice | 5 mA |
| Dimensions | 48 x 19 x 14 mm |
| Environmental class | II. indoor general (acc. EN 50131-1) |
| Operational temperature range | -10 �C to +40 �C |
| Comply with | EN 50130-4, EN 55022, EN 50581 |
The JA-110G-CO is a plug-in module installed directly inside a stand-alone Ei208W or Ei208DW carbon monoxide alarm, connecting it to the Jablotron 100+ bus.
Highlights
- Plugs into Ei208W / Ei208DW CO alarms
- Bus powered; 5 mA
- 48 × 19 × 14 mm
- Indoor general environment
Where it suits
Adds CO alarms to the security system so events are reported and logged.
Installation and set-up
Connect it to the wired Jablotron 100+ bus, enrol it and set its behaviour in F-Link. We recommend installation by a Jablotron-trained installer; the installation manual is available in the Downloads tab.
Tags: JA-110G-CO, CO detector module, carbon monoxide, Ei208W, Jablotron 100+, bus