JB-110N Jablotron 100+ Bus PG Power Output Module
- Brand::Jablotron
- Product Code: JB-110N
- Availability: In Stock
| Power | from control panel BUS 12 V DC (9 � 15 V) |
| Current consumption (relay off/on) | 5 mA/45 mA |
| Current consumption for cable selection | 45 mA |
| - Maximum switched voltage | 250 V AC |
| - Maximum current - resistive load (cos?=1) | 16 A |
| - Maximum current - inductive (capacitive) load (cos?=0.4) | 8 A |
| - Minimum acceptable relay output through-wattage (DC) | 0.5 W |
| Protection | Class II |
| Dimensions | 78 x 40 x 20 mm |
| Weight | 34 g |
| Classification | Security grade 2/Environmental class II (according to EN 50131-1) Only when installed into the JA-194PL or JA-195PL mounting box together with the JA-111H TRB module! |
| Operational environment | indoor general |
| Operational temperature range | -10 �C to +40 �C |
| Average operational humidity | 75 % RH, non-condensing |
| Certification body | Trezor Test s.r.o. (no. 3025) |
| Complies with | EN 50131-1 ed. 2+A1+A2, EN 50131-3, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 |
The JB-110N provides a power relay contact driven from the Jablotron 100+ bus. It suits lighting, fans and similar loads, and it is not addressable, so it takes no system position.
Highlights
- 250 V AC; 16 A resistive, 8 A inductive
- Bus powered; 5/45 mA (relay off/on)
- Protection class II
- Fits a JA-19xPL box or the panel enclosure
Where it suits
Budget-friendly automation output without using an address.
Installation and set-up
Connect it to the wired Jablotron 100+ bus, enrol it and set its behaviour in F-Link. We recommend installation by a Jablotron-trained installer; the installation manual is available in the Downloads tab.
Tags: JB-110N, power output module, relay, Jablotron 100+, bus