JA-111H TRB Jablotron 100+ Bus Interface Module for Wired Detectors

Power	from control panel bus 12 V DC (8�15 V)
Quiescent current consumption	5.2 mA (+ consumption of connected devices, all inputs connected to GND)
Maximal current consumption	11 mA (+ consumption of connected devices)
Maximum allowed current of the connected detector	50 mA
Type of control device (ACE)	type B
Dimensions	18.1 x 31.5 x 12 mm
Wire length	300 mm (cannot be extended)
Weight	8 g

ClassificationSecurity grade 3 / environmental class II (according to EN 50131-1). Valid only if built-in to Security grade 3 or higher certified housingEnvironmentindoor generalOperating temperature range-10 �C to +40 �CAverage humidity75% RH, non-condensationCertification bodyTrezor Test s.r.o. (no. 3025), Kiwa Nederland b.v.Complies withEN 55032, EN 50130-4, EN 50131-3, T 031, EN IEC 63000

The JA-111H TRB connects any wired detector with contact or impulse outputs to the Jablotron 100+ bus and powers it. The module is small enough to fit inside the detector.

Highlights

• Inputs for tamper, alarm and fault or masking
• Supplies the connected detector (max. 50 mA)
• Works with the CT-01 roller-blind detector
• 18.1 × 31.5 × 12 mm; 300 mm fixed leads

Where it suits

Brings third-party wired detectors onto the bus.

Installation and set-up

Connect it to the wired Jablotron 100+ bus, enrol it and set its behaviour in F-Link. We recommend installation by a Jablotron-trained installer; the installation manual is available in the Downloads tab.

Write a review

Please login or register to review